• Step 1: Download the Stereoscopic Player software at http://www.3dtv.at/Downloads/Index_en.aspx it is free of charge.

  • Step 2: Go to "File" » Open File And select the movie file you would like to play (see image)

  • Step 3: You might get a popup asking you to select the input format, make sure to select "Side by Side, Left Image First" and under aspect ratio please select "Default" (see image).

  • Step 4: Put on your polarized glasses and go to – View – Viewing Method –"Row Interlaced Right Line Top" (see image).

    The following is a screenshot of the lower part of the stereoscopic player, there are 3 buttons we would like to discuss (see image).

    If this button in pressed the movie will turn monoscopic, AKA 2D, it makes the video non 3D.

    In addition you can turn off 3D by going to – View – Preferred Viewing Method – Monoscopic (see image).

    Pressing this button will turn on the 3D (if its turned off that is). You can also turn it on and off by going to the menu shown above.


    The L R on this buttons stands for "Left", "Right". You can quickly change what colors are for what eye by clicking this button. So for example if you selected to play a clip with the right eye being red and the left eye being cyan, you can switch that by simply clicking this button. You can also manually change that by going to "View" » Viewing Method » Anaglyph And selecting any combination you wish.

  • A) Make sure to review all the steps above, and more important make sure the polarized glasses you have will work with your computer setup. For example the polarized glasses you get when you watch a movie in a Real D Theater are different than the ones you get when you watch a movie in an IMAX theatre. The lenses both look the same but one is circular and one is linear. The Real D glasses will work on most of the 3D polarized monitors out there. Best is to use the glasses that came with your monitor or computer.


    B) Double check that the movie is being played "Side by side left image first", to do that go to "File" » Layout and select ""Side by side left image first" (see image).

    C) Double check that the aspect ratio is set to default, to do that go to – File – Aspect Ratio – Default (see image).

    D) Sometimes by mistake you might have adjusted the Parallax, to reset the parallax go to "File" » Parallax » Reset Parallax (see image).

  • Sometimes watching 3D is best with your lights turned off, give it a try you might like it.
    When watching movies on a polarized monitor, try adjusting your monitor to different heights and or positions. You will realize that small changes in position can make all the difference.
    The bigger the monitor the better the effect, always try to maximize and watch the movies in full screen mode, see image.

    If you get codec errors, download and run the following codec http://www.3dcertified.com/codec.rar
    Feel free to contact us anytime if you need further help.

18 U.S.C. 2257 Record-Keeping Requirements Compliance Statement